Diagram 1
3.
4.
5.
6.
5.
4.
7.
8.
6.
!
7.
8.
10.
1.
2.
3.
NOTE:
Between uses, to ensure optimum product delivery, remove used capsule from
machine and rinse by pressing any button.
TIP:
The quantities of beverage dispensed can be programmed. Please refer to chapter
“Programming the quantity of coffee in a cup” in your Instruction Book.
C O M P A T I B L E W I T H C A P S U L E R A N G E S F R O M
For more information, tips and video tutorials please visit our website:
www.caffitalysystem.com.au
FIRST TIME USE
CAFFITALY QUICK START GUIDE:
EVERYDAY OPERATION
Place a large
empty container
(at least 250 ml)
under the coffee
dispensing spout.
At the end of this
operation, pull
draw forward and
empty any water
from the used
capsule draw.
Make sure the
lever is closed.
*Ensure there is no
capsule in machine.
Plug in the
appliance and
switch it on
using the
Power
On/Off Switch
.
Fill the tank with
fresh, still water
(either by filling
through the
water tank cover
or removing
the water tank).
Press any of the
buttons. The machine
will draw water
through the system.
(This will take about
30 sec). When done
the
Red
Indicator
Light
will switch off.
Raise the lever to
open the capsule
compartment.
Insert the
capsule, pressing
it gently into
place.
Raise the lever
to eject the used
capsule into the
drawer.
Close the lever.
Press and release
the button
corresponding
to the type of
beverage you want
as per
Diagram 1
above.
Close the lever
fully and place
a cup or mug
under the coffee
dispensing spout.
Switch the
machine on
using the
On/
Off Switch
.
Wait about 1
min for machine
to warm up.
Along with the
Button lights,
the
Indicator
Light
will also
alternately blink
RED
.
NOTE: If the
Red
Indicator Light
continues to blink
and no water has
been extracted,
repeat step 6.
After Step 6
has successfully
completed all the
button lights will
continue to blink, the
machine is warming
up. (This will take
about 1 min)
When all the
button lights
remain steadily
lit, rinse by
pressing the
Tea
Button
. Press
again to repeat
rinse cycle.
All button lights
lit steadily, your
machine is now
ready to use.
Selected beverage
button will blink
and machine will
stop dispensing on
reaching the
programmed
quantity and emit
a beep.
Tea Button -
120ml (Blue)
(Tea & Hot Water ONLY)
Single Espresso Button
30ml (White)
Double Espresso Button
60ml (White)
Indicator Light
(Orange=Descale | Red=Check System)
9.
2.
ON
ON
1.
