BIXOLON SLP-TX400, Руководство по обслуживанию, Страница: 15 / 81

Rev. 1.04 - 15 -
SLP-TX400x/TX403x
2-2-3 LED indicator for various printer statuses
LED 1 LED 2
Printer Status
Color Status Color Status
Green On Green On Print standby mode Print standby mode
Red On Red On Error mode Ribbon is not detected
Red On Orange On Error mode
Paper jam (gap/black mark is not
recognized)
Red On Green Blink Error mode Printer head overheating
Red On Red Blink Error mode Cover open
Red On Orange Blink Error mode No paper
Red On - Off Error mode Media calibration failure
Red Blink Red Blink Error mode Auto-Cutter error
Orange On Orange On
Mode switching
notification
Mode switching notification
Green Blink Red On Wait for input
Print is paused temporarily. Wait for
button input
Green Blink Green Blink Wait for input Cover Close Mode. Wait for button input
Green On Red Blink Wait for input Print Cancel Mode. Wait for button input
2-2-4 Test Printing using Windows driver
1) Install the Windows driver.
Refer to the
“Windows driver manual” in the CD for the installation procedure.
2) Set the
“port” of Windows driver to the appropriate interface to be used. Refer to the “Ethernet interface
user
’s manual” in the CD when using Ethernet interface.
3) Print the test page using the
“Print test page” function of Windows driver.
2-2-5 Test Printing Label design program
- The label design program is included in the separate CD.
1) Install the label design program.
2) Refer to the
“Label Design Program Manual” included in the CD and set the interface.
3) Print the test page after designing a label.