BT-710 Operation manual
P/N : 710-ENG-OPM-EUR-R02
Bistos Co., Ltd.
2020.03
34
13 Manufacturer’s declaration on EMC
BT-710 needs special precautions regarding EMC (Electromagnetic compatibility) and needs
to be used according to the EMC information provided in this user manual. Wireless commu-
nications equipment such as wireless home network devices, mobile phones, cordless
telephones and their base stations, walkie-talkies can affect the BT-710 and should be kept at
least 1 m away from the equipment.
NOTE
•
Using unqualified accessories, sensors and cables will increase the electro-
magnetic emission and reduce the electromagnetic immunity of the device.
•
Do not put the device close to other devices or stack together. When neces-
sary, observe the device closely to ensure that it runs normally in the environ-
ment.
•
The device requires special EMC protection, and it is necessary to install and
maintain it in the environment that meets the following EMC information.
•
Even if other devices comply with CISPR emission requirements, they may also
cause interference to this device.
•
When the input signal amplitude is smaller than the minimum amplitude
specified in the technical specifications, it may result in inaccurate measure-
ments.
•
Mobile communication devices or wireless network devices may have an
impact on the device.
13.1 Electromagnetic emissions
The BT-710 is intended for use in the electromagnetic environment specified below.
The customer or the user of the BT-710 should assure that it is used in such an environment.
Emissions test
Compliance
Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1
The BT-710 uses RF energy only for its internal function.
Therefore, its RF emissions are very low and are not likely
to cause any interference in nearby electronic equipment.
RF emissions
CISPR 11
Class A
The BT-710 is suitable for use in all establishments other
than domestic, and may be used in domestic establish-
ments and those directly connected to the public low-
voltage power supply network that supplies buildings used
for domestic purposes, provided the following warning is
heeded:
Warning:
This BT-710 is intended for use by healthcare
professionals only. This equipment/ system may cause
radio interference or may disrupt the operation of nearby
equipment. It may be necessary to take mitigation
measures, such as re-orienting or relocating the BT-710 or
shielding the location.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations /
flicker emissions
IEC 61000-3-3
Complies