BT-36 Operation manual 12
P/N:36-ENG-OPM-EXP-R00
Bistos
2022.03
4.
Cleaning & Storage
Since the sensor part of the device is a very sensitive part, always keep it clean and
intact for accurate measurements.
Do not immerse the device in a container with liquid.
If the sensor needs to be cleaned, apply alcohol to a cotton swab or soft cloth and
carefully clean it. Use the device after 20 ~ 30 minutes after cleaning.
Store the device in a place that can avoid direct sunlight and free of dust or
pollutants.
Remove the batteries if the device is not in use for a long time.
5.
Trouble shooting
Problem
Solution
The power does not
turned on.
•
Check the battery charging status.
•
Check the status of the battery insertion in the main body.
The main body gets
wet
•
Remove the batteries from main body.
•
Wipe the body with a dry cloth and store it in a warm and
dry place for at least 12 hours.
If the measurement
is not working
properly
•
When measuring infants or children, if they struggle too
much, measurement errors may occur because the distance
between the skin surface and the sensor may not be
constant, so please measure again after they calm down.
•
It is recommended to measure body temperature after
stabilizing at room temperature(15~25
℃
, 59
℉
~77
℉
).
•
Temperature measurements may be inaccurate if measuring
temperature immediately after exercise, come back from
outside, or taking a bath, and measurements may also be
inaccurate when measuring outside instead of indoors.
•
For accurate measurement, remove hair, foreign substances,
or makeup between the thermometer and the skin.
•
If the battery is not replaced when the low battery icon in
displayed on the LCD screen, the measurement value may
not be accurate.
•
If user measure temperature close from air conditioner, fan,
heater, it may cause inaccurate results.
※
If the problem is not solved or have additional questions, please contact the Bistos Co., Ltd.
service center.
