Bison MMIB-20, Руководство оператора

Страница: 28 / 72

AIR INTAKE REGULATION OF THE
RECEPTION TRAY
When the grain is been ground, generally the volume
of air pulled by the fan is reduced. For this reason,
it is very important to allow the air intake through
another part of the mill so that the fan functions
correctly. When pasture is being ground this
situation does not occur.
To increase the air intake, loosen the wing nut
that holds the gate (A), turn the crate door where
necessary and re-tighten the wing nut.
ATTENTION: Once the mill operation is
finished, replace the gate back.
DANGER: Do not adjust the air intake
regulating gate while the mill is under
operation.
ORIENTATION OF THE CYCLONE
ATTENTION: When you have finished the
operation and need to transport the mill on
a road, do not forget to reorient the cyclone
backwards and tighten the screws. Otherwise
it can cause a serious accident since the
cyclone can turn without restriction and could
hit any vehicle.
Depending on the needs that arise at the time of
transport or operation of the mill, the cyclone’s
angular position can be modified. To turn the cyclone,
loosen the screws (A) based at the extension’s
base, turn the cyclone to the desired position and
re-tighten the screws. If in the grinding operation
you need to modify the position several times, then
do not fully tighten the screws so that it allows the
rotation without difficulty.
OPERATION
A
A
23