Bison MMIB-20, Руководство оператора

Страница: 17 / 72

ARROW SHAFT
Stay away from the arrow and all rotating shafts,
while operating the Hammer Mill.
The covers should rotate freely.
Do NOT operate this equipment without the
protections on the power shaft and the rod
universal joint. Make sure that the protective
covers are well placed.
ROTOR
Never lift up the feed hopper if the Hammer Mill
is operating.
Make sure that the hammers and rods are in
good condition.
Verify that the Hammer Mill is not damaged and
that there are not missing screws.
Wear appropriate protection and clothing when
operating the Hammer Mill, since some part of
the material being ground could be ejected and
could hit the operator.
STRIPS AND PULLEYS
Verify that the strips and pulleys are in good
condition.
Stay away from strips and pulleys when the
Hammer Mill is operating.
Keep the guards in good condition and in their
designated place.
SECURITY DECALS
12