BIRD BDS Cal Cart, Руководство по эксплуатации

Страница: 25 / 50

BDS Graphical User Interface Operation
15
Viewing the Data
Data can be viewed while it’s being collected or after a data acquisition completes. The data is displayed in the
following formats:

Table

Time plot

Reconstructed waveform

Smith chart
These views can be accessed and switched at any time by:

Selecting a different view using the buttons on the View tool bar ( Figure 7 on page 15 ).

Right ‐ clicking anywhere on a view and choosing from the pop ‐ up menu.

Selecting View and your choice from the main menu.
Note:
View options are available by selecting “View ‐ >Options…” from the main menu or by right
clicking anywhere on a view and selecting “Options…” from the pop ‐ up menu.
Table View
Figure 7 Data in Tabular Format and View Selection Buttons
The table view displays the most recently collected dataset in tabular form. The fields are described in detail below:

Dataset ‐ The dataset number ‐ a count of how many datasets have been received for the document.

Timestamp ‐ The time the dataset was captured from the BDS Cal Cart receiver.

Elapsed (ms) ‐ The time (in milliseconds) between measurement datasets, giving an indication of data
update rate.

AGC ‐ Automatic gain control indicator.
Note:
Displays “Yes” if automatic gain control is used or “No” if manual gain control is used.

Cal ‐ Measurement calibration indicator.
Note:
Displays “Yes” if the displayed measurement dataset has been calibrated or “No” if it has not
been calibrated.
Note:
Check the probe connection to the receiver if the BDS GUI is indicating that the measurements
are not being calibrated.

Transient ‐ transient detection function is not available on the BDS Cal Cart receiver.