BIRD 4043E, Руководство по эксплуатации

Страница: 23 / 27

16
Chapter 4 Maintenance
Factory Reset
The 4043E includes a reset button which can be used for reseting the unit’s IP
address and other settings. The reset button is recessed in a hole on the bottom
of the unit near the Ethernet jack, see
Figure 15
.
Power must be applied to the 4043E to perform either of the following reset
options.
Reset IP Address
Press and release the button to reset the IP Address, the Status LED will briefly
change to red. The IP address to be reset to the default of 192.168.3.200.
Reset All Settings
Press and hold the reset button for a minimum of 5 seconds, then release the
button, the Status LED will briefly change to red. All of the 4043E settings will be
reset to the factory defaults. The reset will take approximately 30 seconds to
complete.
Figure 15 Factory Reset
Contact the Bird Service Center in the event the power sensor requires
additional maintenance. See
"Customer Service" on page 17
.
5(6(7
67$786
/('