BIRD 4043E, Руководство по эксплуатации

Страница: 9 / 27

Introduction
2
Figure 2 Bird 4043E, Ethernet Communication Power Sensor
Features
RF Input
N-Type (male) connector (shown), other connector types
available, see "Model Identification" on page 19
RF Output
N-Type (female) connector (shown), other connector types
available, see "Model Identification" on page 19
DC Power Connector DC input connector for the included 15 VDC power supply.
Ethernet Port
RJ-45 connector used to interface with the Sensor’s Web UI
and provide the measurement interface.
PTT Connector
Push-To-Talk terminal is used to prevent spurious alarms
during periods when the transmitter is not transmitting, see
"PTT" on page 3 .
Reset Button
This reset button is a hole under the Ethernet jack.

When short pressed (less than 5 seconds), the
button will cause the IP address to be reset to the
default of 192.168.3.200.

When long pressed (more than 5 seconds), all of
the 4043E settings are reset to the factory defaults.
Status LED
Solid green: Power applied during boot-up.
Blue flashing: Normal operation.
Red: Reset button pressed and released.