Directional Power Sensor 4043E
9
RF Measurement Alarms
The 4043E power sensor can be set to display an alarm, and send SNMP
messages, for exceeding forward power and VSWR limits set by the user.
Alarms are controlled on the settings page, a threshold can be set for minimum
and maximum forward RF power in watts and minimum and maximum VSWR.
See
Figure 8 Alarm Settings
The alarm function may be enabled or disabled.
when enabled, a measurement exceeding a threshold will display an alarm
message in the Table View, see
When disabled, alarms are not displayed and no SNMP traps will be generated.
The alarms can be set to latched or unlatched.
When set to latched, alarm messages remain on the display until the Reset
Alarm button is clicked on the settings page.
When set to unlatched, alarm messages are only displayed while the threshold is
exceeded.
Figure 9 Alarm Display
