Directional Power Sensor 4043E
5
Direct PC Ethernet Connection
This connection can be used to view measurement information, manage the
sensor’s behavior, and change the default IP address.
1. Connect a power cable to 4043E power sensor.
2. Connect your laptop’s network port to the LAN connector on the 4043E
using a standard Ethernet cable.
3. Insure that your laptop’s IP address is compatible with the default address
of the 4043E. This may require changes be made to the Ethernet adapter
address on your laptop.
Set laptop’s IP address to “192.168.3.1” and a subnet mask of
“255.255.255.0”.
4. Launch your web browser on the laptop.
5. In your web browsers address box type-in the 4043E’s IP address:
192.168.3.200. and press the ENTER key.
6. The web page interface to the unit should appear in your laptop’s browser
window.
7. Connect sensor to RF delivery system. See
.
9. See
for descriptions of the sensor’s User
Interface.
LAN Connection
A LAN connection is used to allow multiple sensors to be deployed then
monitored via a single PC or SNMP management software.
The 4043E sensor’s IP address should be set to a unique static IP address or set
to DHCP so the IP address can be assigned when the sensor is connected to the
network.
1. Connect a power cable to 4043E power sensor.
2. Change sensor’s IP Address.
a. Connect your laptop’s network port to the LAN connector on the
4043E using a standard Ethernet cable.
b. Insure that your laptop’s IP address is compatible with the default
address of the 4043E. This may require changes be made to the
Ethernet adapter address on your laptop.
Set laptop’s IP address to “192.168.3.1” and a subnet mask of
“255.255.255.0”.
c. Launch your web browser on the laptop.
d. In your web browsers address box type-in the 4043E’s IP address:
192.168.3.200. and press the ENTER key.
The web page interface to the unit should appear in your laptop’s
browser window.
