1
111 mm
13 mm
13 mm
35 mm
41 mm
35 mm
13 mm
Mounting screws
Front view, 45° angle shown
Extra heigth
for tilted device.
28 mm
28 mm
13 mm
5 mm
5 mm
166 mm
1
111 mm
13 mm
13 mm
35 mm
41 mm
35 mm
13 mm
Mounting screws
Front view, 45° angle shown
Extra heigth
for tilted device.
28 mm
28 mm
13 mm
5 mm
5 mm
166 mm
1
111
mm
13 m
m
Mounting screws
Front view, 45° angle shown
Extra heigth
for tilted device.
28 mm
28 mm
13 mm
5 mm
5 mm
Hercules
2s
User Manual
Introduction
Quality
international
level
EN ISO
9001
Microwave motion sensor for
industrial doors
1
Box Contents & Tools Required
1.2
Hercules 2s sensor
with pre-wired 23’ (7m) 6-wire cable
A
B
C
A
B
C
D
D
The box contains the following items:
Tools recommended for installation:
Other items recommended for installation:
- Mounting screws (x2) sized for 3/16” (5mm) hole
- RC Duo 2 remote control (Part # S-RC2)
Self-adhesive mounting template
Instruction manual
Quick reference guide for RC Duo 2 remote control
(stores in slot on battery compartment cover)
- Ladder
- Tape measure
- Level
- Drill with 1/4” (5mm) drill bit
- Electric screwdriver with
bit to match mounting screws
- AWG 4 (5 mm dia) wire stripper for cable sleeve
- AWG 24 (0.20 mm ) wire stripper for single wires
Product Description
1.1
Hercules 2s is an advanced planar microwave motion sensor designed for industrial doors and gates. The sensor can differentiate
between people and vehicles. Its two relay outputs can be programmed independently for a multitude of applications. Hercules 2s
also features cross-traffic optimization and slow-motion detection.
2
TOP
TOP
A
B
C
D
D
Function
Remote
Function
Values/
Description
Mounting
Height
A
2.0 – 2.5 m
2.5 – 3.0 m
3.0 – 4.0 m
4.0 – 5.0 m *
5.0 – 6.0 m
6.0 – 7.0 m
Output
%QPƜI
uration
Output #1
(Green LED)
Output #2
(Red LED)
B
C
Vehicles forward*
Vehicles backward
Vehicles both dir
People forward**
People backward
People both dir
People/vehicles fwd
People/veh bkwd
People/veh both dir
Field size/
Sensitivity
Output #1
Output #2
D
E
X-small/least sens.
Small/less sens.
Medium/norm sens.
Large/very sens.*
Xlarge/most sens.
Output
Hold Time
Output #1
Output #2
F 1
F 2
0.2 sec
0.5 sec
1.0 sec
2.0 sec*
5.0 sec
Pulse on exit
Output steadily on
Output steadily off**
* Factory Settings
** Factory Settings for output 2
Hercules 2s
350841A
11/15
A
B
C
D
E
F G
N
N
N
O
M
H
I
J
C
K
L
Hercules
2s
Microwave motion sensor for industrial doors
Original instructions
1
Introduction
ENGLISH
350699
11/15
1.1 Product Description
1.2 Box Contents & Tools Required
1.3 Parts of the Sensor
Hercules 2s is an advanced planar microwave motion sensor designed for industrial doors and gates. The sensor can differentiate between
people and vehicles. Its two relay outputs can be programmed independently for a multitude of applications. Hercules 2s also features cross-
trafc optimization and slow-motion detection.
A
Housing (aluminum)
B
Mounting bracket
C
Inclination angle handscrews (x2)
D
Microwave planar module
E
Clip for wide detection pattern
(Use setting for wide eld pattern - sec. 7.2)
F
Left button
L
to set function
G
Right button
R
to set value
H
Output 1 indicator (green LED)
I
Output 2 indicator (red LED)
J
DIP switches (for setting
remote control addresses 1-4)
K
Rear cover
L
Connection cable
M
Front cover
N
Cover screws (x4)
O
RegloBeam 2 remote control
required to access complete set of functions
The box contains the following items:
A
Hercules 2s sensor
with pre-wired 7 m 6-wire cable
B
Self-adhesive mounting template
C
Instruction manual
D
Quick reference guide for RegloBeam 2 remote control
(stores in slot on battery compartment cover)
Tools recommended for installation:
- Ladder
- Tape measure
- Level
- Drill with 5 mm drill bit
- Electric screwdriver with
bit to match mounting screws
- AWG 4 (5 mm dia) wire stripper for cable sleeve
- AWG 24 (0.20 mm) wire stripper for single wires
Other items recommended for installation:
- Mounting screws (x2) sized for 5 mm hole
- RegloBeam 2 remote control (Part #
292393
)
TOP
TOP
A
B
C
D
Function
Remote
Function
Values/
Description
Mounting
Height
A
2.0 – 2.5 m
2.5 – 3.0 m
3.0 – 4.0 m
4.0 – 5.0 m *
5.0 – 6.0 m
6.0 – 7.0 m
Output
Config-
uration
Output #1
(Green LED)
Output #2
(Red LED)
B
C
Vehicles forward*
Vehicles backward
Vehicles both dir
People forward**
People backward
People both dir
People/vehicles fwd
People/veh bkwd
People/veh both dir
Field size/
Sensitivity
Output #1
Output #2
D
E
X-small/least sens.
Small/less sens.
Medium/norm sens.
Large/very sens.*
Xlarge/most sens.
Output
Hold Time
Output #1
Output #2
F 1
F 2
0.2 sec
0.5 sec
1.0 sec
2.0 sec*
5.0 sec
Pulse on exit
Output steadily on
Output steadily off**
* Factory Settings
** Factory Settings for output 2
Herkules 2E
350841A
12/15
A
B
C
D
E
F G
N
N
N
O
M
H
I
J
C
K
L
Herkules
2E
Microwave motion sensor for industrial doors
Original instructions
1
Introduction
1.1
Product Description
ENGLI
SH
350699A
12/15
Herkules 2E is an advanced planar microwave motion sensor designed
for industrial doors and gates. The sensor can differentiate between
people and vehicles. Its two relay outputs can be programmed in-
dependently for a multitude of applications. Herkules 2E also features
cross-trafc optimization and slow-motion detection.
A
Housing (aluminum)
B
Mounting bracket
C
Inclination angle handscrews (x2)
D
Microwave planar module
E
Clip for wide detection pattern
(Use setting for wide eld pattern - sec. 7.2)
F
Left button
L
to set function
G
Right button
R
to set value
H
Output 1 indicator (green LED)
I
Output 2 indicator (red LED)
J
DIP switches (for setting
remote control addresses 1-4)
K
Rear cover
L
Connection cable
M
Front cover
N
Cover screws (x4)
O
RegloBeam 2 remote control
required to access complete set of functions
The box contains the following items:
A
Herkules 2E sensor
with pre-wired 7 m 6-wire cable
B
Self-adhesive mounting template
C
Instruction manual
D
Quick reference guide for RegloBeam 2 remote control
(stores in slot on battery compartment cover)
Tools recommended for installation:
- Ladder
- Tape measure
- Level
- Drill with 5 mm drill bit
- Electric screwdriver with
bit to match mounting screws
- AWG 4 (5 mm dia) wire stripper for cable sleeve
- AWG 24 (0.20 mm) wire stripper for single wires
Other items recommended for installation:
- Mounting screws (x2) sized for 5 mm hole
- RegloBeam 2 remote control
1.2
Box Contents & Tools Required
1.3
Parts of the Sensor
TOP
TOP
A
B
C
D
Function Remote
Function
Values/
Description
Mounting
Height
A
2.0 – 2.5 m
2.5 – 3.0 m
3.0 – 4.0 m
4.0 – 5.0 m *
5.0 – 6.0 m
6.0 – 7.0 m
Output
Configu-
ration
Output #1
(Green LED)
Output #2
(Red LED)
B
C
Vehicles forward*
Vehicles backward
Vehicles both dir
People forward**
People backward
People both dir
People/vehicles fwd
People/veh bkwd
People/veh both dir
Field size/
Sensitivity
Output #1
Output #2
D
E
X-small/least sens.
Small/less sens.
Medium/norm sens.
Large/very sens.*
Xlarge/most sens.
Output
Hold Time
Output #1
Output #2
F
1
F
2
0.2 sec
0.5 sec
1.0 sec
2.0 sec*
5.0 sec
Pulse on exit
Output steadily on
Output steadily off**
* Factory Settings
** Factory Settings for output 2
Herkules 2E
350841A
12/15
A
B
C
D
E
F G
N
N
N
O
M
H
I
J
C
K
L
Herkules
2E
Microwave motion sensor for industrial doors
Original instructions
1
Introduction
1.1
Product Description
ENGLISH
350699C
09/17
Herkules 2E is an advanced planar microwave motion sensor designed
for industrial doors and gates. The sensor can differentiate between
people and vehicles. Its two relay outputs can be programmed in-
dependently for a multitude of applications. Herkules 2E also features
cross-traffic optimization and slow-motion detection.
A
Housing (aluminum)
B
Mounting bracket
C
Inclination angle handscrews (x2)
D
Microwave planar module
E
Clip for wide detection pattern
(Use setting for wide field pattern - sec. 6.3)
F
Left button
L
to set function
G
Right button
R
to set value
H
Output 1 indicator (green LED)
I
Output 2 indicator (red LED)
J
DIP switches (for setting
remote control addresses 1-4)
K
Rear cover
L
Connection cable
M
Front cover
N
Cover screws (x4)
O
RegloBeam 2 remote control
required to access complete set of functions
The box contains the following items:
A
Herkules 2E sensor
with pre-wired 10 m 6-wire cable
B
Self-adhesive mounting template
C
Instruction manual
D
Quick reference guide for RegloBeam 2 remote control
(stores in slot on battery compartment cover)
Tools recommended for installation:
- Ladder
- Tape measure
- Level
- Drill with 5 mm drill bit
- Electric screwdriver with
bit to match mounting screws
- AWG 4 (5 mm dia) wire stripper for cable sleeve
- AWG 26 (0.20 mm
2
) wire stripper for single wires
Other items recommended for installation:
- Mounting screws (x2) sized for
5 mm hole
- RegloBeam 2 remote control
1.2
Box Contents & Tools Required
1.3
Parts of the Sensor
