Biotek Synergy LX, Руководство пользователя, Страница: 78 / 198

Warnings and Precautions | 54
l
Flat-head or #2 Phillips screwdriver
l
70% isopropyl, ethyl, or methyl alcohol
Warnings and Precautions
Read the following before performing any maintenance procedures:
Internal Voltage. Always turn off the power switch and
unplug the power supply before cleaning the outer surface
of the instrument.
Liquids. Avoid spilling liquids on the instrument; fluid
seepage into internal components creates a potential for
shock hazard or instrument damage. If a spill occurs while a
program is running, stop the program and turn off the
instrument. Wipe up all spills immediately. Do not operate
the instrument if internal components have been exposed to
fluid.
Liquids. Do not immerse the instrument, spray it with liquid,
or use a dripping-wet cloth on it. Do not allow water or other
cleaning solution to run into the interior of the instrument. If
this happens, contact Technical Support. Do not soak the
touchscreen.
Lubricants. Do not apply lubricants to moving parts.
Lubricant on components in the carrier compartment will
attract dust and other particles, which may cause the
instrument to produce an error.
Potential Biohazards. Wear protective gloves when handling
contaminated instruments. Gloved hands should be
considered contaminated at all times; keep gloved hands
away from eyes, mouth, nose, and ears.
Mucous membranes are considered prime entry routes for
infectious agents. Wear eye protection and a surgical mask
when there is a possibility of aerosol contamination. Intact
skin is generally considered an effective barrier against
infectious organisms; however, small abrasions and cuts may
not always be visible. Wear protective gloves when handling
contaminated instruments.
Synergy LX User Manual
1501000N Revision A BioTek Instruments, Inc.