Sequence BioTech,
LLC
26
Programming examples
SIMPLE PROGRAMMING EXAMPLES
enter the Precision Series Pipettor’s programming mode by first
selecting
MENU
from the
Control Panel
. Now select
“Program”
using
the
Control Wheel
and press
ENTER
. erase the existing program by
selecting
“Delete”
and
ENTER
. to begin entering a new program,
select
MENU
and
ENTER
,
“Program”
and
ENTER
, and finally,
“Edit”
and
ENTER
. the following is a simple program using lower level
commands. Comments (which are not part of the program) are
shown to the right of each line for clarity.
0 Cls
Clears the screen
1 Print Line1 Enter to continue Displays the predefined string (message)
2 Wait
Pauses until user presses
ENTER
button
3 End
Program execution ends
this simple program clears the screen and displays
“Enter to
continue”
on the first line of the display screen. Pressing
ENTER
ends
the program and returns the display screen to the upper level menu.
Below is the same program detailing the steps necessary to enter
and create the new program using
MENU
on the
Control Panel
.
the actual screen display follows.
•
Press
MENU
and rotate the
Control Wheel
to display the
following:
Menu: Program
Select and press Enter
To create a new program or to edit an existing program:
•
rotate the
Control Wheel
to select
“Edit”
and then press
ENTER
.
Program: Edit
•
A blank program beginning at line 0 is displayed as follows:
0: Cmd
Begin programming by entering the
SIMPLE PROGRAMMING
EXAMPLE
outlined above:
•
enter
“0 Cls”
into the first line. this clears the screen. With
the solid cursor under line 0, rotate the
Control Wheel
to
scroll the cursor under the
“Cmd?”
prompt and press
ENTER
to activate the line (Note: the cursor begins to blink when
activated). Now rotate the
Control Wheel
to scroll until
“Cls”
appears. Press
ENTER
to select that command. the first line
of programming is now complete and saved into memory.
0
Cls