BIOS AP DVPro DVT10T2, Руководство пользователя

Страница: 16 / 75

BIOS AP Inc.
－
13
－
POWER DOWN
PLEASE
！
You can then shutdown and turn the device on again.
If you power down before saving operation, none of parameters will be changed.
● Saving the change
①
MODE
＋
SELECT Button (Save)
②
Shutdown and power on
● Cancel the change Power off while doing change
If any of Critical Parameters was changed, hold down the Mode button at first power on at the same time
for system initialization. (This action will set the device to its normal status and abandon recovery status if
any.) After power on, LCD should show its
RAID mode and “Normal” status.
RAID-6
NORMAL
2.3. Front Panel LCD Toggle rolling setup flowchart
ARRAY PARAMETERS
SETTING!
：
Initial Display
↓
Disk Size Setup
：
Hard Disk Capacity Setup
↓
RAID MODE Setup
：
RAID Mode Setup
↓
Drive Mode Setup
：
Number of Drive Setup
↓
SECTOR SIZE Setup
：
SECTOR size setup
↓
LUN SIZE Setup
：
LUN size setup
↓
LUN MODE Setup
：
LUN mode setup
↓
Parity STRIPE Size
：
STRIPE size setup
↓
Host Mode Setup
：
Thunderbolt/eSATA host Enable/Disable
Most of cases, users do
not need to change the
default setting.
Please make sure you
understand the function
before making any
change.