Bionet BM7VET, Руководство по эксплуатации

Страница: 179 / 227

179
BM7Vet Pro User’s Manual
This veterinary patient monitoring device communicates over a 2.4 GHz 802.11b / g
wireless network. Other equipment may interfere with data reception on this wireless
network. This is also true if the equipment complies with the CISPR emission
requirements. When using veterinary patient monitoring equipment to communicate over
a wireless network, be sure to check that it is compatible with existing or new wireless
systems (eg, cell phones, pager systems, cordless phones, etc.). For example, a Bluetooth-
compliant device using the 2.4 GHz frequency band may interfere with the wireless
communication of the veterinary patient monitor. For more information on wireless
deployment, please contact your Bionet representative.
Low amplitude signals such as EEG and ECG are particularly sensitive to interference
from electromagnetic energy. This equipment complies with the tests listed at the
bottom, but does not guarantee complete operation. The "quiet" electrical environment
is better. In general, the greater the distance between electrical equipment, the lower the
likelihood of interference.
M anufacturer’s declaration - electromagnetic emission
The BM7 Vet Pro system is intended for use in the electromagnetic environment specified below.
The customer or the user of BM7 Vet Pro system should assure that it is used in such an
environment
Emission test Compliance Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1 The BM7 Vet Pro system uses RF energy only
for its internal function. Therefore. Its RF
emissions are very low and are not likely to
cause any interference in nearby electronic
equipment
RF emissions
CISPR 11
Class A The BM7 Vet Pro system is suitable for use in
all establishments other than domestic and th
ose directly connected to the public low-volta
ge power supplies buildings used for domesti
c purposes.
Harmonics emission
IEC 61000-3-2
A
Voltage fluctuation
IEC 61000-3-3
Complies