Operation and Care Manual
6
1.5 Warranty Information
When delivered to the end user in new condition in the original container,
the OnPoint 1.2mm Scope system is warranted to be free from defects in
material or workmanship for one year from the date of shipment from
Biomet Microfixation to the end user.
Within the above listed time periods, parts that are returned, freight prepaid,
to Biomet Microfixation and are determined by Biomet Microfixation to be
defective will be repaired or replaced by BioVision Technologies without
charge for parts, labor, or return ground shipping costs. Biomet Microfixation
will make every effort to accomplish this repair or replacement within a
reasonable time. After the warranty period, the purchaser must pay all
charges for repair and replacement. This warranty does not cover products
intended for single patient use beyond the initial use or consumable items.
The above actions by Biomet Microfixation shall constitute your exclusive
remedy and Biomet Microfixation’s sole obligation under this warranty.
Biomet Microfixation shall not be responsible for warranty claims made
after the warranty period. To obtain warranty repair service, you must
contact Biomet Microfixation to obtain a Return Material Authorization
(“RMA”) number, then return the product, freight prepaid, to Biomet
Microfixation. The RMA number and a complete explanation of the
problem must be included with the product being returned to Biomet
Microfixation for warranty service. The product to be repaired must be
returned in its original box and packaging, or a similar box and packaging
affording an equivalent degree of protection. Upon completion of repairs,
Biomet Microfixation will return the product to the end user, freight prepaid.
The warranty period for replacement parts shall begin upon shipment of
same, but shall in no event exceed the warranty period of the defective
part. Biomet Microfixation shall have no liability or obligation for a product
that has been subjected to any of the following:
Failure caused by or attributable to Acts of God, improper use, abuse,
negligent care or handling, accident, faulty installation, improper
cleaning, improper maintenance, or other indications of excess voltage.
This warranty is also void if the product has been repaired or modified
without prior written authorization from Biomet Microfixation, if the end-user
has failed to follow the instructions or heed the warnings or specifications
in the Operation and Care Manual, or if the product’s serial number has
been altered or removed.
EXCEPT FOR THE FOREGOING WARRANTIES, BIOMET MICROFIXATION HEREBY DISCLAIMS AND
EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO
ANY AND/OR ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. BIOMET MICROFIXATION HEREBY DISCLAIMS ANY REPRESENTATIONS OR WARRANTY
THAT THIS PRODUCT OR ANY OF ITS PARTS IS COMPATIBLE WITH NON-BIOMET MICROFIXATION
PRODUCTS OTHER THAN VIDEO EQUIPMENT ATTACHED TO ITS VIDEO
OUTPUTS, AS DESCRIBED
IN THE OPERATOR’S MANUAL.
THE LIABILITY OF BIOMET MICROFIXATION, IF ANY,
