bioMerieux TEMPO, Руководство пользователя

Страница: 84 / 258

Using the TEMPO ® system
Managing test results
5-26 TEMPO
®
Reading Station User’s Manual
Set ti ng config u ration o pt ion s fo r th e fil ter on sampl es, tests, and cards
The window for setting configuration options for the filter is used to filter
samples, tests, and cards in the table on the test results management screen to
make it easier to read.
According to the information you are looking for, you can filter on:
−
a sample (see Filter on samples on page 5-28),
− tests (see Filter on tests on page 5-27),
−
a card (see Filter on cards on page 5-29).
Figure 5-16: Selecting the filter for displaying samples, tests and cards
Note: You can also filter on a sample or a card by entering the barcode using the
barcode reader. In this case:
−
the filter is automatically configured according to the barcode entered,
−
the sample or the card is automatically displayed in the test results field.
WARNING! When the Reading Station computer is started, the samples, tests and cards
filter is configured by default to display tests “with results” and “waiting for
validation”.
Note: Depending on the filter criteria, data may take a while to display if the base
contains a large amount of data.
You can interrupt data display by clicking on the
button
(4) on
the results management screen (see Figure 5-15: Test results management
window on page 5-25).
If you do so, the data visible on the results management screen will be those
displayed before data display was interrupted.