VI.c.16)
Sensor option
Note
The function is accessed only for the additional valve (the external module is necessary).
This option covers the reverse flow sensor and internal sensor. It allows the user to decide which sensor will be used
for data to be submitted to operate the additional valve (valve module sensors or main controller sensors).
VI.c.17)
Calibration
This function lets the user to calibrate the installed valve at any time. During this procedure, the valve is set in a safe
position - if the CH valve is opened, and the basic valve is closed.
VI.c.18)
Measurement stopping
This parameter sets water temperature measurement frequency (control) behind CH valve. If the sensor does not
show temperature change (deviation from pre-set value), the electric valve will be opened or closed in the set stroke
or returned to the initial temperature.
VI.c.19)
Maximum surface temperature
Note
This option is accessible when the base valve is selected.
This function defines the maximum valve sensor temperature (if the base sensor is selected). When this temperature
is reached, the alarm is activated and the valve is closed.
VI.c.20)
Factory settings
This function allows the user to restore the factory settings of the selected valve. The parameters of factory settings
do not change the selected valve type (CH or basic).
VI.c.21)
Valve dismantlement
Note
The function is accessed only for the additional valve (the external module is necessary).
This option is used to dismantle the valve from controller’s memory. Valve dismantlement function
The valve is dismantled or the module is changed (it is necessary to register the new module).
VI.d)
Auxiliary contact
This additional menu provides the parameters to calibrate the additional pump connected to the controller. When the
type of pump is selected, the monitor shows additional menu where it is possible to configure the parameters of the
additional valve. The following flowchart of CH boiler settings is provided:
•
Auxiliary contact
•
OFF
•
CH pump
•
Temperature threshold value
•
Hysteresis
23
