11
4.3. Charging Recommentations
When the eLINE Dispenser is not in use it is recommended
to keep it always in the charging unit. This ensures that the
battery is kept fully charged and the pipette is always ready
for use.
However, during long storage periods (holidays etc.) it is
recommended to disconnect the Charging Stand and Carousel
from the mains outlet.
It is also advisable to remove the battery pack from the
dispenser. This protects the batteries against discharging
during the long storage period.
NOTE:
The battery won’t get damaged when the dispenser is
kept on the charging unit: the charging process is intelligently
controlled by a microprocessor.
NOTE:
If battery is kept as full as possible, it will lengthen
its lifetime.
4.4. Electrical specifications
Battery
- Rechargeable NiMH battery back with protection circuit
- 4.8 V, 500 mAH
- Charging time 6 hours for empty batteries
- Initial Charging 12 hours
AC-adaptor for Charging Stand or direct charging
-Input voltages and main plug according to local requirements
-Output voltage 8 VDC, 740 mA
AC-adaptor for Charging Carousel
-Input voltages and main plug according to local requirements
-Output voltage 10,5 VDC, 1600 mA
5. Programming principles
The eLINE Dispenser features ten different operating modes
which are divided in to the three Main Modes (d, dST/OPT) and
Custom Mode (CST).
Main Modes:
Operating Modes:
d
d (user selects the aliquot size and the
number of dispensings)
