9
that by pressing “enter”, only after that you can complete your
work, and/or start charging the dispenser. Please note that if
“enter” is not pressed the dispenser will not start charging,
even placed in charging stand/connected to AC-adaptor.
NOTE:
In case you continue to work with the dispenser after
the low bat-alarm, the battery will eventually be completely
discharged. Then the battery-symbol and led indicator start
to blink, and there is no response from operating buttons.
Charge the dispenser.
Initial charging of 5 minutes is required before use, if the
battery is totally discharged. During that time the “Load”-text
is displayed and you can’t use the dispenser.
When the text disappears from the display, you can continue
to work with the dispenser keeping it still connected to the
charger.
4.1. Charging with the Charging Stand and
Charging Carousel
The Charging Stand and Carousel are desktop charging units.
The Charging Stand accommodates one eLINE Dispenser and
Charging Carousel four eLine Dispensers.
The Charging Stands and Carousels operate through the metal
contacts placed in the sides of the Dispenser and the head of
the Charging unit.
Before operating the AC-adaptor must be connected to the
socket at the rear of the Charging Stand as well as to the
electrical outlet. Before connecting the AC-adapter to the
electrical outlet, check that its voltage setting corresponds
to the voltage setting of your electrical outlet.
NOTE:
The Charging Carousel is used to charge the dispenser
without the tip. If you need to charge the dispenser with the
tip attached, you can use the Charging Stand with the Tilting
Piece mounted.
Cat. No.
Product
730981
Charging Stand for one pipette
730991
Charging Carousel for 4 pipettes
Includes Universal AC-adaptor (with EU, UK, US/JPN, AUS, KOR and CHN
plugs)
