biodex 950-440 Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 76

biodex 950-440 Скачать руководство пользователя страница 63

63

Indicator

Color

Status

LED on left

Solid Blue

Receiver Board is/was connected.

Slow Blink Blue

Building wireless network (searching).

LED on right

Solid Blue

Active communications to application software.

Dark

No communications to application software.

Table 8.2.

LinkBox Indicator

.

NOTE

: When connecting a tactile belt receiver box, the connection status light can

alternate from green to red, but the screen does not display a channel selection. If the
belt has been idle for some time, it is “sleeping” and will not immediately connect. By
touching the < RESET> button, the belt receiver “wakes up” and connects correctly.

There are two icons on the upper right corner of the display that indicate tactile belt/link box
communication and tactile belt receiver box battery status; the first for wireless reception and
the second for battery.

Figure 8.7

On-screen Indicator Illustrating Wireless Connection and Battery Life.

Charging the tactile belt receivers

There are two ways to charge the tactile belt receiver boxes:

1.

Wall outlet charger (fastest charge).

2.

USB connection to display.

«
...
61
62
63
64
65
...
»

Содержание 950-440













































































Отзывы:

Нет отзывов