50
Changing Fall Risk Defaults
Figure 7.12.
Specifying Default Settings and Data for Fall Risk Tests.
Use Fall Risk Defaults to change the default settings and associated normative data (see
Error!
Reference source not found.
for the default settings).
Note:
Changing the default conditions will make comparisons to the default normative invalid.
Note:
Changing the default conditions will make comparisons to the default normative invalid.
Creating Custom Protocols
Use Custom Protocol List to add, edit, or delete customized testing or training protocols (see
Figure 7.13).
Managing Custom Protocols
Training and testing protocols can be created for a specific purpose. After a protocol is created,
it can be accessed from the main Training and Testing menus.
Creating a New Protocol
1.
At the Main screen, touch <Utilities>.
2.
At the System Utilities screen, touch <Configuration>.
3.
Select <Balance System SD Configuration> from the Configuration screen submenu.
4.
Select <Custom Protocol List> from the Balance System SD Configuration submenu.
5.
The Custom Protocol list is displayed (see Figure 7.13).
6.
Touch <Add Protocol>.