biodex 187-130 Скачать руководство пользователя страница 52

Страница: 52 / 119

The Patient Definition Screen

(See Figure 4-2.)

On this page, the user can add a new patient, edit existing patient information or select an existing patient

to study. All pertinent information regarding the patient is displayed on this page. Fields are provided for

the Patient Name, Identification Number, Address, Phone Number, Height, Weight, Sex, Date of Birth.

The Study window, at the bottom of the screen, provides fields for Physician, Referring Physician,

Technologist, Notes, Test Date and Procedure.

To Select an Existing Patient

To select a patient that has already been entered into the system, click on the <Patient Definition>

icon in the primary tool bar. The Patient Definition screen should now be displayed.

Click on <Open> in the screen tool bar. The Patient List should now be displayed.

Double-Click on the desired patient to select that patient. The Patient Definition screen should now

be displayed with the new patient selected.

Click on <Close> to return to the Operation screen. The selected patient should now appear at the

top of the screen.

To Edit an Existing Patient

To edit an existing patient, click on <Patient Definition> in the primary tool bar. The Patient

Definition screen should now be displayed.

Click on <Edit> in the screen tool bar. The Patient List should now be displayed.

Double-Click on the desired patient to select that patient. The Patient Definition screen should now

be displayed with the patient to edit selected.

Make the necessary edits by highlighting each parameter to edit, then keying in the new

information.

Click on <Save> to save the edits.

Click on <Close> to return to the Operation screen. The edited patient should now appear at the top

of the screen.

To Add a New Patient To the Patient List

To Add a new patient to the Patient List, <Patient Definition> in the primary tool bar. The Patient

Definition screen should now be displayed.

Click on <Add> in the screen tool bar. The fields on the Patient Definition screen should now be

highlighted.

Enter all pertinent information on the Patient Definition screen and in the Study Information

window at the bottom of the screen.

Click on <Save> in the screen tool bar to save the new patient. The System will prompt you to add a

procedure to the patient file.

Click on <Okay> to access the Procedure Selection screen. Click on <Expand All> or <+> to show

the patient information. Highlight the desired procedure and click on <Select>. The system now

returns to the Operation screen.

1. INTRODUCTION

THYROID UPTAKE

4-4

Содержание 187-130
























































































































Результаты поиска

Содержание 187-130

Отзывы:

biodex 187-130, Руководство по эксплуатации и обслуживанию, Страница: 52 / 119

Результаты поиска

Содержание 187-130

Отзывы: