biodex 075-594, Руководство по установке

Страница: 15 / 16

15
Biodex Medical Systems, Inc. © 2017
Power Up the Atomlab 500 and/or Atomlab Wipe Test Counter
The following steps detail the process for powering up the Atomlab 500/Atomlab Wipe Test
Counter:
•
Plug the Power Strip into an AC wall outlet.
•
On the Interface Module, verify that there is an LED indicator that is solid green and a
yellow flashing LED.
•
Turn on the tablet computer power by pressing the power switch on the tablet.
•
The Atomlab500 application software automatically runs when the tablet starts up.
•
The Main Menu is displayed.
If the Main Menu is not displayed after the tablet boots up, a message will be displayed
indicating that the software is looking for a detector.
Note: Occasionally, the system boots before the detector. This can cause the system to
display a message stating that it has not identified a detector. If such a message is
displayed, touch <Rescan> to start a new search for the detector.
•
When the detector is located, touch <Accept> to continue.