biodex 075-594, Руководство по установке

Страница: 5 / 16

5
Biodex Medical Systems, Inc. © 2017
Assembling the Atomlab 500, 500Plus, and Atomlab Wipe Test Counter
•
Place the Tablet onto the Interface Module as illustrated in
Figure 2
.
Figure 2. Tablet When Placed on the Interface Module.
Figure 3. Tablet Connection to Interface Module and Power Strip
.
•
Plug one end of the USB Cable 1 into the Tablet and the other end into the Interface Module.
•
Plug the power connector of Cable 2 into the Tablet. Plug the other end into the power strip
making sure the power strip has not been plugged into an electrical connection .
To ensure the appropriate steps are followed, please advance to the correct pages.
•
If you purchased an Atomlab 500, continue to the next page.
•
If you purchased an Atomlab 500Plus, advance to page 9.
•
If you purchased a Wipe Test Counter, advance to page 13.