biodex 075-594, Руководство по установке

Страница: 10 / 16

10
Biodex Medical Systems, Inc. © 2017
Connecting the Power Cable for the Interface Module:
•
Connect the two sections of Cable 5 by plugging the cable into the power transformer (see
Figure 8). Place the power connector end of Cable 5 into the Interface Module as illustrated
in the circular inset at the upper left of Figure 8. Place the other end of the power cable into
the power strip.
Figure 8. Connecting the Power Cable 5 to the Interface Module.
Note: If a printer is not being installed on the Atomlab 500, proceed to page 15.