Biocontrol HHR 3000 PRO, Руководство программиста

Страница: 36 / 75

At point 1 when user enters macro no functions are performed, HHR is
only checking if a Special Action function is in Action Area and after thats
goes to first screen.
1. HHR perform all Screen functions included in Screen 1
2. HHR perform all Screen functions 1 from Screen 2, after that HHR run into
Special Screen functions then HHR move to Control Area and perform its
functions, after that HHR move to Action area and perform its functions.
Next HHR returns to Screen 2 and perform Screen functions 2
3. HHR perform all Screen functions in any screen only if there is less then 10
screens in each macro
4. HHR moves to next screen and perform its functions.
As it was already mentioned after entering the macro(and action area) HHR only
check if Special Action Area function is in code, if it is HHR sets its registers, if
there isn't any nothings happens, next HHR move to screens and run first screen.
Flow chart 2
The Special Screen functions or using defined Transponder Read button make
HHR behave the same way. HHR moves from current screen to Control Area and
performs functions assigned there, after that HHR moves to Action Area and
perform functions and at the end HHR comes back to screen that user was before.
To give you more detailed look let's assume that Transponder Read button is
defined by Special Action Area function, then HHR will be working according to
points below(based on flow charts)
●
move from current screen(screen 2) to Control Area
●
perform all Control Area functions and move to Action Area (3b
D01B2.4 HHR 3000 PRO Manual 36/75