Biocontrol HHR 3000 PRO, Руководство программиста

Страница: 46 / 75

WARNING Section
Warning section allows you to customize standard messages (warnings) which
appear on HHR's LCD. Time of displaying warning is definable you can set it from
0sec to 9 sec. We can share all the messages to:
●
HHR OS control messages.
●
User Messages.
●
Data entering messages.
If you wish to change time of displaying warning(turn it off) please put one
digit(time), after that '^' char and content of warning. You must be aware that those
2 chars are taken into account as warning content, so you can define not 30 chars
but 28.
Syntax:
<warning_name>:<warning_time>^<warning_value>
Example:
w_TAGEXIST:0^Transponder/already exist!
That line would turn off w_TAGEXIST warning in HHR, so it would be never
displayed in HHR.
Below a list of standard warning is presented, during creating Application Program
you don't have to declare all the warning, those which you left undeclared will take
a standard value, moreover during creation you don't have to put warnings in
sequence(as it is in table), you can put it whatever you like.
List of standard warnings
Name Standard value
w_WAIT Please/wait!
w_UNIQUE This value/must be unique!
w_NOEDIT This value/is NOT editable!
w_NOTNULL This value/must be not null!
D01B2.4 HHR 3000 PRO Manual 46/75
!
Warning Rules
Maximum length of warning(value) is 30 characters.
Character “/” are signal for break-line HHR. Maximum amount of break-
line in each warning is 3.
The warning syntax is following:
<warning_name>:<warning_value>