BioCare Medical ONCPRO0001 Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 87

BioCare Medical ONCPRO0001 Скачать руководство пользователя страница 57

ONCORE PRO, Operating Manual, Rev. K

57

Click “

Import

" to import the contents of the export package. A status bar will be displayed to show the progress of

the import process.

All new protocols, templates and reagents will be added to the system.

All existing protocols that share the same name as an imported protocol will be overwritten.

All existing templates/special protocols that share the same name or index position as an imported

template/special protocol will be overwritten.

All existing reagents that share the same name as an imported reagent will be overwritten.

The system will provide a list of protocols and templates that will be overwritten. Click “OK” to continue or
“Cancel” to abort the import process.

Figure 76

After the system has imported a new protocol, the system will automatically refresh all protocols.

Save all customizations before performing an import, otherwise, some recent protocol modifications may be
lost.

Note: Protocols cannot be transferred between different protocol versions. The protocol import process will abort
if the current protocol version number does not match the version number of the export package. Please update
to the latest protocol version before importing a new protocol package.

Figure 77

Click “

Display Current Protocol Version

” to view the current protocol version number. The version number will

automatically update after importing a manufacturer’s protocol update.

The manufacturer’s protocol updates must be imported in sequential order. The current protocols

must be up to date before installing the next manufacturer’s release.

Click “

Exit

” to close the utility.

«
...
55
56
57
58
59
...
»

Содержание ONCPRO0001
























































































Отзывы:

Нет отзывов