BIO RAD PowerPac Universal Power Supply, Инструкция по эксплуатации

Страница: 29 / 42

PowerPac Universal Power Supply Instruction Manual
Page | 21
Step Procedure Description
6. Save the changes. Notice that after editing an existing method – even while the
method was running – the PowerPac instrument makes a
copy of the original method. The edited method appears in
the method list with the name of the original method
appended with (unsaved).
Starting from the Method List screen, you can either
overwrite the existing method or save the new version with a
different name. Therefore, do one of the following:
•
Overwrite the existing method:
a. Press the SAVE soft key to save the method.
Notice that pressing the SAVE soft key on the
Method List screen displays the Method Exists!
screen.
b. Press the OK soft key to save (overwrite) the old
version of the method.
• Save the edited method with a new name:
a. Press the OPEN soft key.
b. Press the up arrow key until EDIT NAME appears
at top of the screen and a cursor appears to the
right of the method name.
c. Press the key multiple times to delete the
characters (right to left) in the method name.
d. Use the alpha-numeric keypad to enter the new
method’s name (up to 10 characters).
e. Press the Methods soft key.
f. Press the SAVE soft key.