Kapitel 1 Safety instructions
Achtung
All areas which can only be opened with tools are maintenance areas. Unauthorised opening of the de-
vice may be dangerous to the user.
• Condensation may form on or in the device during transitions from cold to warm temperatures. Please only remove
the system from the packing materials once the authorised operating ambient temperature has been reached.
• Do not connect or disconnect any lines during a thunderstorm.
• The elmeg hybird 300 / elmeg hybird 600 may only be operated in dry rooms.
• Do not as sem ble the elmeg hybird 300 / elmeg hybird 600 in damp rooms or in are as subject to a risk of explo-
sion.
• The installation cables may only be laid inside of buildings.
• In operation, the elmeg hybird 300 must be mounted on a wall in the specified direction (see
Installation process
auf Seite 11).
• Only fit the connection cables to the appropriate connectors.
• Lay connecti on cables to prevent accidents.
• Avoid the following influences:
• Direct sunlight
• Heat sources (e.g. heating elements)
• Electronic devices (e.g., audio equipment, office equipment or microwaves)
• Penetration of humidity or liquids
• Corrosive liquids or vapours
• Heavy dust
• Only open those areas of the system specified in the installation instructions.
• Do not touch plug contacts with sharp, metallic or damp objects.
• Only use approved accessories.
• Only terminals that offer SELV (safety extra low voltage) and / or meet ETS 300047 may be connected to the el-
meg hybird 300 / elmeg hybird 600. Correct use of the permitted terminals meets these requirements.
• Clean the elmeg hybird 300 / elmeg hybird 600 only with a slightly dampened cloth.
Achtung
The elmeg hybird 300 must be connected to the functional earth before being initially brought into ser-
vice. The functional earth must be connected to the equipotential bonding strip via a connecting line
with a minimum of 2.5 mm
2
.
Mains connection (230V~mains)
• Installation of the electrical connection (shockproof socket) for the system (and any additional devices) must be
performed by an authorised electrician to avoid damage to persons and property.
• The system is designed for connection to a functional earth; this must be connected before being brought into ser-
vice.
An »earth line« should be located in the vicinity of the assembly site (water line, heating line or the building installa-
tion's equipotential bonding strip). Connection to the system must occur via a connecting line of min. 2.5 mm
2
.
• If possible, provide a separate electric circuit for the 230V connection of your system . If other household devices
bintec elmeg GmbH
1 Safety instructions
elmeg hybird 300 / 600
1
