Lateral guide for modules
Module connection in the elmeg hybird 300 housing
Connection module – In the example MC CL (see
Mounting modules
auf Seite 20).
Plug connection between module and Connection module
Fixation screws of the Connection module in the earth bar
(1)
Place module on lateral guide (2).
(2)
Push in the direction of the arrow into module plug socket (3).
(3)
Connection module (4) (see
Mounting modules
auf Seite 20) push in the direction of the arrow into the
connector of module (5).
(4)
Screw module onto earth bar (6).
Achtung
Module Connection module must always be screwed onto the elmeg hybird 300's earth bar.
6.2 Mount module for module slot 11
As pictured, the module is inserted into the plug base at an angle of ca. 45 degrees (A), then pushed down (B) until
the plug snap tabs lock into the module. To remove the module, simultaneously press both tabs to ward the outside;
the module snaps into the position shown at bottom of the image. It may then be extracted in the opposite direction
(A).
Plug base for module
Plug base snap tab
Module
Insertion direction for module mounting
6.3 Open module slot 1
Under module slot 1, you'll find the slots for modules 9 - 11 and the connections for the modules on slots 7 and 8.
6 Mounting modules in the elmeg hybird 300
bintec elmeg GmbH
14
elmeg hybird 300 / 600
