3
SD card
- - — - -
Flickers green
Write / read data
Glows green
Memory card detected but no access
Description of LED functions (elmeg hybird 300 / elmeg hybird 600)
1
Power management
An overload has occurred on the system; e.g. overload at S
0
interface. The system attempts to return
to normal operation after removal of the fault.
2
System messages present
Error message if, e.g. the SIP provider is not registered, or the client is not detected at the USB host.
The system is initialised
When switching to operating voltage, the LED blinks until the system is operative.
Operating status
The system is in normal operation; no errors detected.
3
Memory card detected
Memory card detected but no access.
Write / read data
Data are currently being written or read on the SD card.
bintec elmeg GmbH
3 Base module interfaces
elmeg hybird 300 / 600
9
