Binder ULTRA.Guard UF V 500, Руководство по эксплуатации

Страница: 29 / 117

UF V (E3) 09/2018 Page 29/116
Avoid direct solar radiation on the chamber. Do not place the freezer in direct vicinity of cham-
bers with a high heat emission.
•
Permissible ambient humidity: 70% r.h. max., non-condensing.
•
Installation height: max. 2000 m / 6561.7 ft above sea level.
Minimum distances:
•
between several chambers: 250 mm / 9.84 in
•
Wall distance, rear: 100 mm / 3.94 in (spacer is supplied, see chap. 4.2)
•
Wall distance, laterally, on the side without door hinge: 100 mm / 3.94 in
•
Wall distance, laterally, on the side with door hinge: 240 mm / 9.45 in.
•
Spacing above the chamber: 100 mm / 3.94 in
Ventilation openings must not be blocked. Ensure a distance of at least 100 mm / 3.94 in to the ventilation
openings on the freezer’s front and rear.
To completely separate the chamber from the power supply, you must disconnect the power
plug. Install the chamber in a way that the power plug is easily accessible and can be easily
pulled in case of danger.
With an increased amount of dust in the ambient air, clean the condenser fan (by suction or blowing) sev-
eral times a year. Check the condenser air filter frequently and clean it if necessary (chap. 24.4.1).
Avoid any conductive dust in the ambiance according to the chamber layout complying with pollution de-
gree 2 (IEC 61010-1).
For the user there is no risk of temporary overvoltages in the sense of EN 61010-1:2010.
Do not install or operate the freezer in potentially explosive areas.
DANGER
Explosion hazard.
Danger of death.
∅
Do NOT operate the chamber in potentially explosive areas.
∅
KEEP explosive dust or air-solvent mixtures AWAY from the vicinity of the chamber.
For freezers with water cooling:
To avoid any possible water damage, provide a floor drain at the location of the device. Select
a suitable installation site to avoid any consequential damage by splashing water.