NAVIGATION
35
Once set tap
to confirm the selection and return to the settings screen. Tap
to return
to the settings screen without saving.
8.12
Calibration
This option allows you to calibrate the screen so that it responds accurately to your screen taps.
You will need this function only if the unit begins to respond inconsistently to your screen taps.
When tapped your will be shown a warning screen, tap
to confirm you would like to
calibrate the screen. The screen will change to the calibration screen; follow the onscreen
instructions in order to complete the calibration process.
9 Route Plan
Once you have entered your destination and
confirmed it is correct, you will be taken to
the Route Plan screen; from here you can
begin navigating, carry out a simulation of
the route or add additional waypoints to the
journey.
Tap
to return to the Free Navigation
Menu screen.
Select a destination so that it is highlighted
blue and tap
to view the location on
the map.
9.1 Navigating
To begin navigating to you entered destination tap
. The unit will begin to calculate a route
from your current location to your destination. Once calculated the screen will change to the route
navigation screen and you are ready to drive.
While you are navigating it is still possible to browse the map (see page 19). Note that the unit will
continue to navigate if you are moving, but your position on the map will not be updated and no
voice prompts will be given. Tap
to return or wait for 10 seconds after which the unit will
automatically resume normal navigation.
While the unit is calculating the route you can tap
at any time to cancel the route and
return back to the Route Plan screen.
