NAVIGATION
21
6.1
Entering an Address/Postcode
One of the most commonly used methods for inputting a destination into the unit, tap
Address
the
screen will change to show the following.
This screen shows a list of any previously used
cities/towns. You will also be able to enter a new
city name as well as changing the country you
wish to search within. Every time you enter a new
city it will be added to the list of recent cities so
that it can be quickly used in the future.
To select a previously used city, select the city
from the list so that it is highlighted blue and then
tap
to accept or double tap on the city
name, the screen will change to the Address Search window with the selected city now shown on
the city field.
To change the country tap on the currently selected country name, this will be defaulted to United
Kingdom. A new screen will open with a list of all available countries (note: the list of countries will
depend on the model of unit you have purchased, e.g. UK & ROI or Western Europe). Use the
or
keys to move through the list until you see your desired country. Then select the country
from the list so that it is highlighted blue and then tap
to accept or double tap the country
name. Alternatively tap in the white text box which shows the name of the currently selected
country, you will be shown a keyboard screen. Enter the name of the country you are looking for
and tap
. Tap
to accept or double tap the country name. Now the screen will change
to show either a keyboard if no previous city has been entered which allows you to enter the name
of the city or postcode you are looking for or you will be shown a list of previously entered cities as
covered above.
If the country is correct and the required city does not appear on the previously used list or you
wish to enter a postcode. Tap on the white box at the top of the screen which says “Click Here”,
this will open a keyboard which allows you to enter the name of the city or the postcode you are
looking for.
Tap on the keyboard characters to enter the
name of the city or Postcode you are looking
for. As you enter characters the keyboard will
start to blank out letters, this is because the
unit is narrowing down the search and only
showing characters which can be entered.
The number in the top right of the white box
shows the number of possible matches.
Continue entering characters until the unit
narrows the search down to a point where the
remaining possible matches will be shown on
a list, or when the
is shown in white, tap it to be shown all remaining matches. Scroll
through the remaining matches, select the correct city/postcode from the list and tap
to
confirm or double tap the list item. The screen will change to the Address Search window with the
selected city now shown on the city field.
