25
4.13
There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for each of
During a call:
Press <UP/DOWN> to increase or decrease the volume level respectively.
The current setting is shown. When you end the call, the settings will remain
at the last selected level.
the earpiece and speaker volumes.
Adjust Earpiece and Handsfree Volume
4.14
You can talk to someone nearby without letting the caller hear you during a
During a call:
Press <C/MUTE> to mute the microphone and
“MUTED
” is displayed on
“MUTED"
will be replaced by on
“LINE IN USE”
call.
Mute
a
Call
the display. Your caller cannot hear you. Press <C/MUTE> again to
unmute the microphone.
the display, and the caller will be able to hear you again.
4.12
During a call connection, put the corded handset on the base station to end
Or press <SPEAKERPHONE> if you have a call in handsfree mode.
the call.
End a Call
4.15
The corded base unit can make an emergency call with the corded handset
when the mains AC power is disconnected.
Pick up the corded handset and wait for several seconds to get the dial tone
and then enter the phone number to make a call.
speakerphone when the mains power is off.
When the mains power is off, you can also answer an incoming call
When the phone rings, pick up the corded handset to talk to the caller
Emergency Call without Mains Power
Note:
It is not possible to dial numbers from memories or use the
with the corded handset.
after a few seconds.
