58
9.8 Switch Between OGMs
By default, the answer machine is set in
ANS & REC
mode which allows
callers to leave a message. This mode can be changed to
ANSWER ONLY
which does not allow callers to leave a message. In that case, your callers
will be prompted to call back later.
When the answering machine is switched ON, you can select
ANS & REC
1. Press <MENU/OK> and <UP/DOWN> to select
ANS. MACHINE.
or
ANSWER ONLY.
Using the Menu
Press <MENU/OK> and <UP/DOWN> to select
ANSWER MODE.
Press <MENU/OK> to confirm.
9.9
9.9.1 Play the TAM messages
If you have new messages, the base display will show e.g. 01/02 MSGS,
New messages are played first, and then are saved as old messages, until
they are deleted. Old messages are played again after all new messages
are played completely.
TAM
Messages
which means you have 1 new message out of a total of 2 messages.
In idle:
1.
Press <PLAY/STOP> to listen to messages and memos.
2.
Press <PLAY/STOP> if you want to stop the playback.
3.
Press <REPEAT/OGM> to skip back to the previous message
4. Press <FWD/MEMO> if you want to skip forward to the next
message during message playback.
5.
Press <DELETE> if you want to delete the current message being
played.
during message playback.
5.
Press <MENU/OK> and <UP/DOWN> to select
ANS & REC
or
ANSWER ONLY.
4.
Press <MENU/OK> and <UP/DOWN> to select
TAM SETTINGS
.
2.
3.
9.9.2 Delete a Message on the TAM
1.
Press <DELETE> while a message is playing.
2.
You will hear a tone and the current message or memo playing will
be deleted. If there are more messages, the next message will
start to play.