24
4.10.2 Direct dialling
Lift up the corded handset or press <SPEAKERPHONE> to connect to
digit you cannot correct it with the <C/MUTE> key.)
the line and then enter the phone number. (Note: if you enter a wrong
4.10.3 Call from the phonebook
Press <PHONEBOOK> to access the phonebook and press <UP/DOWN>
Lift up the corded handset or press <SPEAKERPHONE> to dial out the
selected phonebook entry.
to select the desired phonebook entry.
4.10.4 Call from the call list
Press <CALLS> to access the Call List and press <UP/DOWN> to select
the desired Call List entry. Lift up the corded handset or press
<SPEAKERPHONE> to dial out the selected Call Log entry.
4.10.5 Call from the redial list
Press <DOWN / REDIAL> to access the redial list and press <UP/DOWN>
<SPEAKERPHONE> to dial out the selected redial number.
to select the desired redial number. Lift up the handset or press
4.10.6 Call timer
Your base display automatically times the duration of every call. The call
timer appears on the display as soon as a call is answered or about 15
seconds after dialling, and remains on the screen for a few seconds after
(HH:MM:SS).
4.11
Answer a Call
When there is an incoming ring, pick up the handset or press
<SPEAKERPHONE> to answer the call.
Using the corded base:
4.10
Make an External Call
4.10.1 Preparatory dialling
Enter the phone number and lift up the corded handset or press
<SPEAKERPHONE> to dial the number. When entering the number, if
you make a mistake, press <C/MUTE> to delete digits.
Note:
To insert a pause in the dialling sequence, press and hold the < 0 >
button, the screen will then show a
“P”
in the number.
Press <FLASH> to insert a recall (flash) signal and the screen will
show a "F".
the end of the call. It is shown in hours, minutes and seconds format
