27
4.17 Find the Cordless Handset
You can locate any cordless handsets by paging from the base unit:
1. In idle mode, press <MENU/OK> and <UP/DOWN> to select
PAGE ALL HS
.
2.
Press <MENU/OK>. "
PAGING
" will flash on the base screen.
All handsets registered to the base will produce the paging tone and
"
PAGING
" flashes on the screen. You can stop the paging by pressing
<TALK> / <OFF> / <C/MUTE> on any handset or <C/MUTE> on the
base to stop paging.
If you have more than one cordless handset registered to the base,
or press 9 to call all registered handsets.
Note:
If there is an incoming call during the intercom calling, the phone
will ring with the incoming call instead of the intercom.
press <C/Mute> and select the handset number to call the other handset,
Using the corded base:
Using a cordless handset:
4.18
This feature allows you to make internal calls, transfer external calls and
make conference calls. If the called base or handset is not answered within
60 seconds, the called base or handset will stop ringing and the calling one
will return to standby mode. (Or after 100 seconds if calling from the base.)
Make an Internal Call
4.18.1 Intercom
Using a cordless handset:
1. In idle mode, press <C/MUTE> and all the other registered handset
2. Enter < 7 > to call the base or enter the number of the handset that you
want to call, or enter "9" to call all handsets and the base.
3. The called base rings and the corded handset must be lifted off the base
Note:
If only one handset is registered to the base station, pressing
<C/MUTE> will call the base immediately.
numbers will display, along with a "7" and a "9".
Note:
If there is an external call while you are on an intercom call, you'll
answer the external call.
hear warning beeps, and you have to end the intercom call, before you can
The called handset rings and <TALK> must be pressed on that handset
OR
to establish the internal call.��
3.
to establish the intercom call.
