9
IMPORTANT
To avoid overflowing ingredients, do not put more than 1 liter in the cup, especially if
processing at full speed. Do not place more than 500ml in the cup if you are processing hot
liquids or ingredients that tend to foam.
When processing a liquid that is hot, remove the overcap to allow steam to escape. For your
safety, the temperature of the processed products must not exceed 40° C.
If food sticks to the wall of the cup, turn off the appliance and unplug the appliance from the
socket. Use a spatula to remove food from the wall of the cup.
ATTENTION!
Never turn on the appliance with the cup uncovered, and also don't remove the cup while the
appliance is in operation.
To add ingredients or for viewing the food being processed, remove only the overcap.
ATTENTION!
This appliance is intended for household use and should not be used for any other purpose.
Do not leave the appliance running for more than 3 uninterrupted minutes. If processing has
not finished after that time, let it stand for 10 minutes before putting it back into operation.
To avoid damaging the appliance, never turn it on with the glass empty.
It is not recommended to crush ice, as well as solid foods without adding any liquid, as it
may cause overheating, damaging the cup sealing system, wear and/or breakage of the
blades and other components of the appliance.
If you notice that the machine cannot process the food or that it stops processing, decrease
the amount or size of the food in the pre-cut before inserting it into the cup.
Failure to comply with these guidelines will be considered an unsafe act and abusive use of
the appliance.
In the case of any irregularities contact your nearest authorized service center.
5. Cleaning and Maintenance
5.1 Cleaning Procedures and Products Used
Your equipment is built with first-line materials, so use it correctly and you will get great
satisfaction. Keep your equipment always clean and well taken care of, as this will make it have a
much longer shelf life.
A daily cleaning of the machine must be carried out for good operation and durability.