8
4.3 Operating Procedures
Before operating your appliance, make sure that the items that come into contact with the
food (cup, lid and overcap) are perfectly clean. Perform cleaning with the appliance disconnected
from the electrical network. Follow the cleaning instructions in item 5 of this manual.
Make sure that the cup is firmly inserted in the coupling and cup holder. Also check that the
supply voltage of the appliance complies with that of the electrical network.
After verifying these items, follow the appliance operating processes below:
ATTENTION!
To avoid damaging the appliance, never turn it on with the glass empty. Before connecting
it, insert liquid in the minimum amount at twice the height of the blade.
• Connect the power cord to the power grid;
• Add the liquid according to your recipe, but always comply with the "MAX" level indicated on the cup.
In possession of the pre-cut pieces of food (approximately 2 cm), place them in the glass;
• Before turning on your appliance, always lock the lid with the overcap in the cup and activate the
pulse function a few times by turning the knob counterclockwise;
• To start processing, turn the knob clockwise by increasing the speed gradually until you reach the
desired speed;
• To add ingredients during processing, remove the cover by turning it counterclockwise and pulling it
up vertically. Use the opening in the cover without needing to remove it;
• Allow time necessary to process food properly;
• After the process is completed, switch off the appliance by turning the knob counterclockwise and
reduce the speed to "0" (off) position and remove the appliance from the wall outlet.
