IDU (Indoor Unit)
Tune up procedure
Installation
IDU can be placed on the supporting structure like a desk or installed on the interior
wall. If choose to install on the wall, fallow instruction below. Then connect cables from
each of TX, RX patch antennas to IDU as described in this manual. Please note that all
the procedure must take while power is off.
1.1 Fixing
At first, using the M12 Anchor bolts, install GIR-2005 Chassis bracket into
the wall Bracket that is fixed to the wall in Figure 3-1. And then, using M4
bolt, assemble GIR-2005 with Chassis bracket and wall-bracket.
Fig. 3-1 Assemble Wall Bracket with GIR-2005 Chassis Bracket
4×(3×M4 Bolt)
4×M12 Anchor Bolt
