BIMG Metvisa CLMC.510, Инструкция по эксплуатации

Страница: 6 / 32

6
• When the equipment is being cleaned take care. Turn off the equipment pushing the on/off button
and the putting general switch to the position “0” (turn off). Then, disconnect the equipment of the
electrical mains. Never put the hands in the cylinders moving.
ATTENTION!
The manufacturer does not take responsibility for possible damage direct or indirect caused
by the non-compliance of the norms and instructions present in this manual.
The machine described in this manual meets regulation against the mechanical risks. The
safety is obtained with:
1. Mechanical project that makes the hands access impossible to the electrical and spinners
dangerous parts;
2.
Fixed right and left side protections preventing access to move parts, as for example, gear
and chain transmission set.
3. Fixed rear cover inhibiting access to the engine.
4. Front protection e obstruction cylinder that prevent access to the cylinders during the
dough handling.
5. Dough Scraper , which scrapes the dough from the cylinder, avoiding that the worker do in
another ways, as putting sharp objects or even the hands.
6. Low Table projected for the worker to be at a safety distance of the equipment during the
dough handling.
7. Gutter , used to support and direct the dough until the cylinders.
8. Ruler (graduated ruler) indicates the distance between the superior and inferior cylinder,
determining the thickness of the dough. With the graduated ruler avoiding the worker put the
hands in the cylinders to check the distance between then.
9. Feet (model CLMC.510) with the appropriate height for handling the machine, following the
requirements for good ergonomics.
10. Non-slip feet prevent the machine to move during the use.
To view the parts described above, see the image in item 2.1 (Main Components
– Page 8)
of this manual.
ATTENTION!
Always that some item referred to safety be removed from the equipment (for example, for
cleaning or maintenance), replace it in place and confirm that it is performing its function
correctly.