BIMG Metvisa CLMC.510, Инструкция по эксплуатации

Страница: 10 / 32

10
IMPORTANT
The packaging components (cardboard, wood, foam, strips, etc.) are products that can be
assimilated to municipal solid waste and can be disposed of without difficulty. If the
equipment is installed in countries with different standards, dispose of the packaging in
accordance with current regulations. Dispose of the product correctly to help protect the
environment. For more information on recycling, contact your local authorities, waste
disposal service or the shop where you purchased the product.
3. Installation
3.1 Machine Layout
The connection to the electrical mains and the arrangement for operation must be carried out
by a qualified professional. Check if the machine voltage matches to the electrical mains voltage.
It is essential to make this manual available to the professionals who carry out the
installation.
For ease of transportation, the machine is packed with the feet (model CLMC.510), the low
table and wheel handle crank disassembled.
To mount the crank, it is necessary to thread it onto the wheel handle. The fixing of the feet
parts (model CLMC.510), must be done with the washers, screws and nut that came with the
equipment.
Following, the positions of assembly and the spare parts list of the feet (only model
CLMC.510):