To transfer files from the terminal to a Personal Computer proceed
as follows:
✔
use a communication program that contains the
KERMIT
transfer
mode for binary files (e.g. Windows Hyperterminal), and set the same
communication parameter settings as the terminal;
✔
connect the terminal to the PC using a serial line cable as indicated in
Figure 11.1 on page 2-90
✔
if you want to transfer one file at a time, use the
Backup
function;
select the file to be transferred and confirm by pressing
.
If you want to transfer all the files select
Backup all
.
✔
The transfer procedure now starts. Put the PC kermit reception mode.
The terminal and the PC will display the name of the file and the
percentage of data transferred.
✔
On completion of the transfer, if the
Backup all
function was used,
press
ESC
on the terminal to return to normal weight display mode; if
the
Backup
function was used, select the next file to be transferred (if
any) and repeat the procedure.
On completion of the operation, the binary files relative to the terminal
files can be found in the specific directory on the PC, for example
PRODFILE
will contain the product file.
If there is already a file with this name in the directory, it will not be
overwritten but the new file will be saved with a number appended to the
filename, e.g.
PRODFILE1
.
D450
2-91
Содержание D450
