Bilanciai D450, Руководство пользователя

Страница: 23 / 99

10.4.10 Request transmission of scale status (version
EV2001)
XS<CR>
In the case of a positive reply, the terminal responds with the following
string:
<s1><s2><CR><LF>
The characters s1 and s2 are ASCII characters that must be interpreted
as hexadecimal values.
The bits indicate the scale status as follows.
<s1> bit 0 in range
bit 1 weight stable
bit 2 centre zero
bit 3 displayed net weight
<s2> bit 0 not utilised
bit 1 not utilised
bit 2 not utilised
bit 3 print request: the print key has been pressed or
input n° 3 is activated.
10.4.11 Scale zeroing
AZ<CR>
10.4.12 Tare acquisition
AT<CR>
10.4.13 Tare entering
nAT<CR>
The command AT must be preceded by a weight expressed in a
maximum of 7 characters comprising the decimal point, if present.
D450
2-23