Bilanciai D450, Руководство пользователя

Страница: 12 / 99

When a bit assumes the value "1" the corresponding signal is "true"; the
significance of the signals is as follows:
<s1> bit 0 minimum weighment signal
bit 1 tare locked signal
bit 2
tare preset(1)/self-weighed (0) entered signal
bit 3 centre zero signal
<s2> bit 0
LSB weighing extension signal (ME only)
bit 1 weight stable signal
bit 2 overload signal
bit 3 MSB weighing extension signal (ME only)
<s3> bit 0 tare entered signal
bit 1
tare locked cancelled signal (ME only)
bit 2 weight not valid
bit 3 printing in progress
<s4> bit 0 approved instrument
bit 1 converter fault
bit 2 scale configuration parameters error
bit 3 not utilised
The following protocols are available: Cyclic (see par. 10.3.2 on page
2-17), On request (see par. 10.3.3 on page 2-17), ACK-NAK (see par.
10.3.1 on page 2-17), Remote commands (see par. 10.4 on page 2-18).
D450
2-12