Bike-Lift LEB-50 LIFT, Руководство по эксплуатации и обслуживанию

Страница: 23 / 42

EN
Operating manual No.
057-2-6-0015-R0
Version 2021
P. 23
7.1 Loading operations
1- Make sure that the power cable is connected to the mains and that the vice (Figure 6,
[1]) is in the low position;
2- Move the bicycle closer to the lift and insert the seatpost in the vice. 3- Tighten the
vice by turning the handle (Figure 6, [2]);
4-
Place the supplied steering wheel lock on the handlebar and wrap the belt around the
bicycle frame (Figure 7, [1]);
WARNING : Never lift the load before making sure that it is firmly locked in the
front vice.
Always check during lifting that the load does not slope and unbalance;
During the ascent/descent phase the operator is required to distance from the lift
according to the length allowed by the control panel cable.
5- Start lifting by holding the arrow upwards on the control panel (Figure 6, [3]);
6- Once the desired height is reached, release the button. The lift stops automatically.
7- It is possible to adjust the inclination of the bicycle by turning the handle located near
the lifting pole (Figure 6, [4]).
WARNING: To adjust the inclination of the bicycle, position yourself sideways to the lift, as
shown in Figure 8.
Figure 8 - position of the operator in the adjustment phase